1 of 2 ES2F voltage range: 300v current: 2.0 a surface mount fast efficient plastic rectifier diodes for surface mount applications low profile package easy pick and place glass passivated chip junction superfast recovery times for high efficiency low power loss, high efficiency high temperature soldering: 250c/10 seconds at terminals maximum repetitive peak reverse voltage v rrm working peak reverse voltage v rwm maximum rms voltage v rms maximum dc blocking voltage v dc maximum average forward rectified current at t l =110c i (av) 2.0 amps peak forward surge current 8.3ms single half sine-wave superimposed on i fsm 50 amps rated load (jedec method) at t l =110c maximum instantaneous forward voltage at 2.0a v f 1.10 volts maximum dc reverse current t a =25c 10 at working peak reverse voltage t a =100c i r 200 m a maximum reverse recovery time (note 1) t rr 35 ns maximum reverse recovery time (note 2) t rr 50 ns maximum reverse recovery current (note 2) i rm 3.0 amps maximum stored charge (note 2) q rr 50 nc typical junction capacitance (note 3) c j 15 pf typical thermal resistance (note 4) r q ja 75 r q jl 25 c/w operating junction and storage temperature range t j , t stg -55 to +150 c notes : (1) reverse recovery test conditions: i f =0.5a, i r = i.0a, l rr =0.25a (2) measured at i f =1.0a, di/dt=100a/ m s, v r =30v, i rr =0.1i rm (3) measured at 1.0 mh z and applied reverse voltage of 4.0 volts (4) units mounted on p.c.b. 5.0 x 5.0mm (0.013mm thick) land areas features ! case: smb/do-214aa, molded plastic ! terminals: solder plated, solderable per mil-std-750, method 2026 ! polarity: cathode band or cathode notch ! marking: type number ! weight: 0.093 grams (approx.) mechanical data ! ! ! ! ! ! ! maximum ratings and electrical characteristics t a = 25 c unless otherwise specified single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. characteristic ES2F 300 volts 225 volts 210 volts 300 volts symbol unit smb(do-214aa) dim min max a b c 1.91 2.21 d 0.15 0.31 e 5.00 5.59 g 0.10 0.20 h 0.76 1.52 j 2.00 2.62 all dimensions in mm a b c d g h e j 3.30 3.94 4.06 4.70 a b c d g h e j www.sunmate.tw
2 of 2 0.1 1 10 100 1,000 1 10 100 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 0.01 0.1 1 10 100 20 40 60 80 100 0.1 1 10 100 1,000 1 10 100 10 20 30 40 50 60 0 80 90 100 110 120 130 140 150 0 1.0 2.0 3.0 50 100 150 0 40 80 120 160 200 175 125 25 75 rating and characteristic curves ES2F fig. 1 - maximum forward current derating curve lead temperature, c average forward rectified current, amperes fig. 2 - maximum non-repetitive peak forward surge current number of cycles at 60 h z peak forward surge current, amperes 8.3ms single half sine-wave (jedec method) at t l =110c resistive or inductive load fig. 3 - typical instantaneous forward characteristics per leg t j =25c pulse width=300 m s 1% duty cycle t rr q rr fig. 4 - typical reverse characteristics per leg instantaneous forward voltage, volts instantaneous forward current, amperes reverse voltage, volts junction temperature, c t j =125 c f=1.0 mhz vsig=50mvp-p instantaneous reverse leakage current, microamperes percent of rated peak reverse voltage, % fig. 6 - typical junction capacitance per leg fig. 5 - reverse switching characteristics per leg capacitance, pf @2a, 20a/ m s @5a, 50a/ m s @5a, 50a/ m s @1a, 100a/ m s @1a, 100a/ m s @2a, 20a/ m s stored charge/reverse recovery time, nc/ns t j =125 c t j =125 c t j =100 c t j =100 c t j =25 c t j =25 c www.sunmate.tw
|
